Product Specifications

Shower Screens

Fully Framed

Dias Nautilus™ 4010 Model
Aluminium frame to all sides of glass
Aluminium either powdercoated (“painted” finish) or anodised (“metal” finish)
Grade A Safety Glass (Toughened or Laminated) to requirements of Australian Standard AS1288-2006
Clear or Patterned (“Obscure”) Glass as specified
Colour coded accessories where available – otherwise “Bright Silver”
Anti-bacterial “frost” glazing vinyl
Stainless Steel Pivot Pin with positive close pivot block
Double handle stile with magnetic closing strip
Door width to be 750mm nominal unless specified otherwise
“Dog Leg” Return Panels to be two piece.

Sliding & Corner Entry

Dias Series 9300™ Model
Aluminium, glass, accessories and glazing vinyl as per “Fully Framed”
Pulley-roller sequential door opening system to Sliding type
Sliding to have 2 x opening doors and 1 x fixed (2 x fixed for Corner Entry) Door width to be approx. 1/3 of front width (sliding) or 1/2 (corner entry)
Corner Entry system to have full length grip stiles with magnetic strips
“Dog Leg” Return Panels to be two piece.

10mm Frameless
10mm Clear Grade A Toughened Safety Glass c/w Flat Polished Edges
Acid Etch to be “Matelux”or equivalent if specified
Opus Hinges and “shelf” brackets, Chrome Plated
Adequate fixing substrate, tiling, drainage, etc. to be provided/guaranteed by customer/builder
Opus TK38 or BK38 knobs (C &D handles optional as specified)
No PVC door swipe unless specified – standard 10mm gap beneath door (may vary depending on the “fall” of the floor)
Clear silicone butt joints – glass to wall/floor, and glass to glass
No Stabilizer Bar nor “Lid” unless specified (note these may be required for structural integrity).

Semi-Frameless

Dias Mirage Square Cut 3051™ Model
Aluminium frame generally limited to “head, sill and walls”
Aluminium either powdercoated (“painted” finish) or anodised (“metal” finish)
6mm Grade A Toughened Safety Glass to requirements of Australian Standard AS1288-2006; Clear or Patterned (“Obscure”) as specified
Colour coded accessories where available (may not be exact colour match) Anti-bacterial “frost” glazing vinyl/infills
Pivot clamp mechanism with captive Stainless Steel Pivot Pin – door swings both inwards and outwards (may “clash” with internal fixtures such as shower rose heads, tiled walls, soap dishes, etc.)
Handle knob code SECFP – 24mm diam. with finger recess; Bright Silver unless specified otherwise
Door width to be 750mm nominal unless specified otherwise
“Dog Leg” Return Panels to be one piece.

Bath Screens

Dias Single or Dual-Panel as specified – standard height & width only
Bright Silver aluminium frame with 6mm Clear Toughened Glass only
PVC “wipe” strip to bottom – WILL NOT PREVENT WATER ESCAPE.


Fixed Panel & Curtain Rod

Generally as per “Fully Framed”
19mm diam. aluminium curtain rod – straight or bent as specified (shower curtain by customer)
Curtain rod fixed with PVC rod ends (Black) and to top of fixed panel.
(N.B. Semi-frameless Fixed Panels available but subject to strict size limitations as specified – no curtain rod supplied with this system.)


General (All as Required/Applicable)

Trim angles (where required) to be 1.6mm thickness
Holes associated with existing shower screens may not be covered with the new installation
Sanitary Grade (Clear) Silicone sealing to outside of frame/tile interfaces
Customer warrants existing tiling system is sound and waterproof
Prior to installation Customer is to, accurately locate all water, gas and electricity pipes, and advise Interglass Pty. Ltd. in writing accordingly.


Sliding Wardrobe Doors

System generally Dias Space:Maker Softline™
Mirror to doors, 4mm Safety Backed
Vinyl to Doors, CSR Group 1 Vinyl Coated Gyprock
White Coat Vinyl, 4mm Clear Float Painted White & Safety Backed
Aluminium either powdercoated (“painted” finish) or anodised (“metal” finish)
Bottom Track to have Extended Front Fascia & 16mm thick “Sill Packer”
Skirtings not cut unless stated otherwise
If Cornice Cut required customer to make good as necessary
No bulkhead supplied
Return panels to be White 16mm Melamine unless stated otherwise. (N.B. joins in coloured Melamine may be required – board sizes are limited)
Customer to remove any existing timber doors and framework which may or may not be supporting shelving, etc.


Glass & Glazing

Glass and glazing shall be in accordance with AS1288-2006 “Glass in buildings – Selection and installation”
Glass type as specified to be classified in accordance with Australian Standard AS4667-2000. Where a specified glass type is not covered by this Standard then BS 952-1 will apply.
Safety Glazing materials will comply with AS2208-1996.


Glass Splashbacks

Standard “base glass” is 6mm Clear Toughened. Low Iron glass is available at extra cost.
Standard GPO Cut Out size is 60x100mm
Paint Colours are as per PPG standard range which may vary from “time to time”
The Customer is to provide a suitable substrate which is flat. Walls are to be plumb, bench tops and overhead cupboards/fixtures are to be level. Size and accessibility issues may result in the need for butt joints
As required the Customer is to disconnect/re-connect all electrical wiring/appliances, plumbing fittings, etc.


Windows & Doors

Standard systems supplied:

  • Sliding & Fixed Lites – Carinya Classic
  • Awning – Carinya Classic
  • Double Hung – Jason Windows Premium
  • Sliding Patio Door – Carinya Classic
  • Hinged Door – Carinya Select

Glass to be Clear in accordance with AS1288-2006 unless stated otherwise
Fly/Security screens to windows & doors not included as standard
Fly screens to have fibreglass flywire
Windows & doors not keyed alike to existing unless stated otherwise
Window/door conversions to be generally angle trim fixed (similar to commercial type frames)
Remedial works to customer’s render, plaster, timber , tiling, etc., which may be damaged upon removal of existing windows & doors to be made good by customer at their expense
Customer to warrant that lintels to door and window openings do exist and are adequate (aluminium framework is not load bearing).

Unless stated otherwise in our Quotation, all windows and doors will be supplied as “standard” and comply with a “BAL – LOW” rating, (please refer to Bushfire Attack Level (BAL) as defined in Australian Standard AS3959 – 2009 : Construction of buildings in bushfire-prone areas). It is the sole responsibility of the Customer to obtain at their cost a BAL Assessment on their home and to advise Interglass Pty. Ltd. at the date & time of Quotation, that a higher than “BAL – LOW” rating is required (namely BAL – 12.5, 19, 29, 40 or FZ).


Mirrors

Mirror to be Viridian Twinkote or equivalent
Glazing in accordance with AS1288-2006
Mirror to be Clear unless stated otherwise
Edgework to suit “type”- generally unframed will be Flat Polished
Framed mirrors to be generally 4mm; Unframed 6mm thickness
Fixing method to be as shown – Glue Fix, Spring Clip Fix, Snap Cap Fix (framed only), Chrome Dome Fix (to 6mm thickness only)
Mirrors to be cleaned & maintained by customer in accordance with mirror manufacturer’s instructions
Guarantee on mirrors to be the same as our supplier(s).


Security Screens & Doors

To be supplied and installed in accordance with Standard Specifications as detailed on separate sheet.

Invisi-Gard Hinged Security Door (Type H, Model Invisi)

Mesh = Marine Grade 316 Stainless Steel Woven Mesh, powder coated Black
Frame = Invisi-Gard IDF1 aluminium, powder coated or anodised
Patented Pressure Retention and Isolation System
3 x Security Butt Hinges – “Hinge Hand” as viewed looking at door from outside
Lockwood 8654 Lock with “3-Point” Lock Kit
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Austral Door Closer
Bugstrip (BS1) to bottom of door
All door hardware colour = Black, unless noted otherwise
Adaptor (Build-Out) frame to be Long or Short Leg type as detailed – will be fitted “square”, which may result in some visible gaps from inside, between timber door frame and adaptor leg (function of existing timber door frame installation/condition)
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom


Invisi-Gard Sliding Security Door (Type S, Model Invisi)

Mesh = Marine Grade 316 Stainless Steel Woven Mesh, powder coated Black
Frame = Invisi-Gard IDF1 aluminium, powder coated or anodised
Patented Pressure Retention and Isolation System
Whitco Leichhardt Lock with “3-Point” Lock Kit, “Hand” as viewed from outside
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Head (25×25 Channel), Jamb (25×20 Channel), Back Edge and Interlock and Track (ST8) – all as required
Bugstrip (BS1) to bottom of door as required
All door hardware colour = Black, unless noted otherwise
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom


Flydoor – Hinged & Sliding (Types H & S, Model Fly)

Frame = SD31, aluminium, powder coated or anodised; no midrail unless noted otherwise
Fibreglass Flywire
Hinged:
A-Latch or Lockwood 8654 Single Lock as specified
Austral Door Closer. Bugstrip to bottom of door.
All door hardware colour = Black, unless noted.
Adaptor (Build-Out) frame if required
Sliding:
Bass Latch, Plastic Pull Handle or Leichhardt Single Lock as specified
Head, Jamb and Bugstrip or Interlock to suit


Grille Hinged Security Door (Type H, Model Grille)

Grille = 7mm Security Grille – “Darley” Single Diamond or “Alspec” A127, to colour shown
Frame = aluminium, powder coated or anodised
Fibreglass Flywire
3 x Security Butt Hinges – “Hinge Hand” as viewed looking at door from outside
Lockwood 8654 Lock with “3-Point” Lock Kit
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Austral Door Closer
Bugstrip (BS1) to bottom of door
All door hardware colour = Black, unless noted otherwise
Adaptor (Build-Out) frame to be Long or Short Leg type as detailed – will be fitted “square”, which may result in some visible gaps from inside, between timber door frame and adaptor leg (function of existing timber door frame installation/condition)
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom

Grille Sliding Security Door (Type S, Model Grille)

Grille = 7mm Security Grille – “Darley” Single Diamond or “Alspec” A127, to colour shown
Frame = aluminium, powder coated or anodised
Fibreglass Flywire
Whitco Leichhardt Lock with “3-Point” Lock Kit, “Hand” as viewed from outside
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Head (25×25 Channel), Jamb (25×20 Channel), Back Edge and Interlock and Track (ST8) – all as required
Bugstrip (BS1) to bottom of door as required
All door hardware colour = Black, unless noted otherwise
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom


Invisi-Gard Security Screen (Type SC, Model Invisi)

Mesh = Marine Grade 316 Stainless Steel Woven Mesh, powder coated Black
Frame = Invisi-Gard IWF1 aluminium, powder coated or anodised to colour shown
Patented Pressure Retention and Isolation System
Tamper Resistant Screw Fix (Face Fit) – Stainless Steel “natural finish”. Aluminium Rivet Fix (Face Fit) if unable to use screws.


Grille Security Screen (Type SC, Model Grille)

Grille = 7mm Security Grille – “Darley” Single Diamond or “Alspec” A127, to colour shown
Frame = SW99, aluminium, powder coated or anodised
Fibreglass Flywire
Tamper Resistant Screw Fix (Face Fit) – Stainless Steel “natural finish”. Aluminium Rivet Fix (Face Fit) if unable to use screws.


Grille Hinged Barrier Door (Type H, Model Barrier)

Grille = 7mm Security Grille – “Darley” Single Diamond or “Alspec” A127, to colour shown
Frame = SD31, aluminium, powder coated or anodised
Fibreglass Flywire
2 x Security Butt Hinges – “Hinge Hand” as viewed looking at door from outside
Lockwood 8654 Lock with “Single” Lock Kit
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Austral Door Closer
Bugstrip (BS1) to bottom of door
All door hardware colour = Black, unless noted otherwise
Adaptor (Build-Out) frame to be Long or Short Leg type as detailed – will be fitted “square”, which may result in some visible gaps from inside, between timber door frame and adaptor leg (function of existing timber door frame installation/condition)
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom


Grille Sliding Barrier Door (Type S, Model Barrier)

Grille = 7mm Security Grille – “Darley” Single Diamond or “Alspec” A127, to colour shown
Frame = SD31, aluminium, powder coated or anodised
Fibreglass Flywire
Whitco Leichhardt “Single” Lock, “Hand” as viewed from outside
Whitco 5-Pin Cylinder, not keyed alike to existing doors unless specified (not compatible with Gainsborough locks)
Head (25×25 Channel), Jamb (25×20 Channel), Back Edge and Interlock and Track (ST8) – all as required
Bugstrip (BS1) to bottom of door as required
All door hardware colour = Black, unless noted otherwise
“Double Door” passive leaf to be fitted with Whitco Patio Bolts, face mounted 1 x Top, 1 x Bottom


Sliding Stacking Flydoors (Type ST, Model Fly)

Frame = SD31 aluminium, powder coated or anodised
Fibreglass Flywire. No Midrail
Heads (25×25 Channels and Cover Angles), Jamb(s) (25×20 Channel & Cover Angles), Tracks (ST8 or ST11 Low Profile), Back Edges & Z-Interlocks to suit
Bass Latch & Plastic Pull Handle(s) (Black)
Extras if specified: Invisi-Gard Stainless Steel Mesh in lieu of Flywire (midrail unless noted otherwise), Leichhardt Lock (Single and/or 3-Point)


Please Note: We reserve the right to substitute any of the above components with one of an equivalent standard, and without prior notice to, and authorisation by, the customer.

Click here to download a copy of these Standard Product Specifications as an Adobe Acrobat PDF. Last updated March 2021.

We supply and install in all Perth Metropolitian Suburbs